hyperchains

Introduction

This document describes the Aeternity Hyperchain architecture and provides configuration guidance for deploying a Hyperchain node. It includes configuration parameters, setup requirements, and step-by-step deployment instructions.

Hyperchains represent an evolution in blockchain architecture that combines Proof-of-Work (PoW) security with Proof-of-Stake (PoS) efficiency. Through a child chain that periodically synchronizes with a parent PoW chain, Hyperchains enable scalable blockchain networks while maintaining strong security guarantees. This hybrid approach significantly reduces energy consumption compared to traditional PoW systems.

The 0.9 beta release provides developers who are already running Aeternity nodes with the foundation to test and validate Hyperchain functionality. This release focuses on establishing the parent-child chain relationship, implementing chain synchronization, and managing validator operations. This documentation will guide you through the essential configuration parameters and setup requirements needed to participate in the beta testing phase.

Before You Begin

This guide assumes you have:

• A running Aeternity node (v6.7.0 or later)

• Experience managing blockchain nodes

• Access to sufficient funds for pinning operations

• Understanding of node validator operations

Important:

• Back up your existing node configuration before making any changes

• Store all private keys securely

• Verify all prerequisites before proceeding

Prerequisites Checklist

Required Infrastructure

• Running Aeternity node (v6.7.0 or later)

• Minimum 4GB RAM dedicated to Hyperchain operations

• 100GB available storage space

• Stable internet connection with minimum 10Mbps upload/download

Required Technical Knowledge

• Experience running and maintaining Aeternity nodes

• Basic understanding of blockchain concepts

• Familiarity with command-line operations

• Understanding of YAML configuration files

Required Accounts and Keys

• Access to parent chain (Aeternity) wallet with sufficient funds for pinning

• Private key for hyperchain staking operations

• Private key for parent chain pinning operations

Setup Process Overview

Time Investment

• Initial setup: 2-3 hours

• Configuration testing: 1-2 hours

• Initial sync time: 2-4 hours (depends on network conditions)

Resource Requirements

• Parent chain wallet must maintain minimum balance of X AE for pinning operations

• Continuous monitoring during first 24 hours of operation

• Regular maintenance windows for updates and optimizations

Implementation Steps

1. Configure parent chain connection

2. Set up and configure Hyperchain node

3. Complete validation period (24-48 hours)

4. Begin network participation

Configuring Your Own Hyperchain Node

Setting up a Hyperchain requires careful configuration and several specific steps. To simplify this process, Aeternity provides the hyperchain-starter-kit tool, which automates many of the complex configuration tasks. See hyperchain-starter-kit (from Aeternity GitHub org)

Please note that this tool is currently in development. While functional, you may encounter some warnings or minor issues as we continue to improve its stability and user experience

Requirements:

• A running Aeternity node installation (following the installation instructions)

• Git version control system installed to download the starter kit code

• Node.js installed to run the hyperchain-starter-kit

• Jq installed for JSON formatting

Note: These instructions use Unix/Linux/MacOS shell commands. Windows users will need to adjust paths and commands accordingly.

1. Install the Hyperchains Starter Kit

git clone https://github.com/aeternity/hyperchain-starter-kit
cd hyperchain-starter-kit
npm install
npm run dev

2. Tool configuration

Our Hyperchain (configuration) will be named hc_test for this example. A directory with the same name will be created in the root directory of the tool where generated files will end up.

npm run dev init hc_test

This command creates an init.yaml file in the root of your hc_test directory. It contains parameters and settings for your hyperchain. It looks like:

childBlockTime: 3000
childEpochLength: 600
contractSourcesPrefix: 'https://raw.githubusercontent.com/aeternity/aeternity/refs/tags/v7.3.0-rc3/'
enablePinning: true
faucetInitBalance: 1000000000000000000000000000
fixedCoinbase: 100000000000000000000
networkId: 'hc_test'
parentChain:
  epochLength: 10
  networkId: 'ae_uat'
  nodeURL: 'https://testnet.aeternity.io'
  type: 'AE2AE'
pinningReward: 1000000000000000000000
treasuryInitBalance: 1000000000000000000000000000000000000000000000000
validators:
  balance: 3100000000000000000000000000
  count: 3
  validatorMinStake: 1000000000000000000000000

This is the default setup that uses Aeternity testnet as parent chain and appropriate block time and epoch length for it. The configuration can be changed as needs following the rules in the Configuration Details.

3. Set Up Contracts

To prepare the Hyperchain contracts run the following:

npm run dev retrieve-contracts hc_test

This will download the standard contracts from the latest Aeternity release and compile them in contracts sub-directory.

4. Generate the Economy

To generate your Hyperchain "economy" according to init.yaml run the following:

npm run dev gen-economy hc_test

This command will generate random keypairs for all accounts that are needed:

• Faucet: can be used to fund other accounts in an automated way

• Treasury: the same purpose as Faucet but manual funding

• Validators: pre-funded (Stakers) accounts used to initialized the Hyperchain

• Pinners: a list of accounts used for pinning

Please note that you have to somehow fund all pinners accounts on the parent chain prior starting your node/validator.

You can inspect the outcome of this in the hc_test/economy-unencrypted.yaml file:

cat hc_test/economy-unencrypted.yaml

Example output:

faucet:
  account:
    addr: 'ak_WNkJkmaEoyScVRaeZeDvvmCqLn1HkfNnQDy1oSJp6Jm5YPpAq'
    index: 0
    mnemonic: 'alpha camp aunt tattoo gravity beach report run cube rude morning ahead elephant super team vague nut property surge erode total rhythm output perfect'
    privKey: 'd747348b11eff32d764a31e2a528fa5624fa6f18a4a6f99070d55ea77905ed2342b30be3a20307cb499230fa857611e5101b0682e57d23d21ca1f360705404d7'
  initialBalance: 1000000000000000000000000000
pinners:
  - account:
      addr: 'ak_2cYQac22msS2BGxR44BiD3CSLDvG9Xuamn61y2gdb8qJXwd7or'
      index: 0
      mnemonic: 'grant comic beauty impose dance rate crash scorpion cream domain level have vessel tortoise fringe north profit loop enemy traffic outer loud version return'
      privKey: '9e2c28f2037e6d352a88137572255ed8af2e86dfb2c2949c4d805ff08bff2784d465bc1253fd1594ecc68e128bb2e241fb2fc0bd48a72e7d57af6dadad67b5dc'
    owner: 'ak_o9UXHESE3mDd9qeDKnxkRrfUS3eY17xkhshZX3VFqAbkVMUDV'
  - account:
      addr: 'ak_kU8HHb7raYHf5USrEv1zQ1WfFU8Fccrzp2nPM7gtoAvi3cFZh'
      index: 0
      mnemonic: 'mesh cousin december tank rival please march museum dragon peanut border tourist execute cash slush also two other casual vague curve verify trophy ceiling'
      privKey: 'c447e8e3159a57ebffb19f3bd7c63afd739e5c592d9bd20620dff61c58d842b062b2dd406ded9a12fb6e455ce2fe3eb1af96182f5a59697e04478e372c58c927'
    owner: 'ak_2uc64DEjX1XCe2dYtTaDBfGXqPDiv1Xcu29T4P2x5NzXnRerAA'
  - account:
      addr: 'ak_2LS9FZLu7v5mVHW8sHa8DxvVWzfKf39SHrHNmmvQseTWCbff5J'
      index: 0
      mnemonic: 'sweet green lizard auto science wreck destroy indicate roast garment cloth album fringe valley remain bike black purse antique annual until umbrella wealth gadget'
      privKey: 'a19771d213eadede7c3332244ddeaa5e2caaa8be4aae79eee8d425e47a237dffafd27c0d8b8485c6dab5ec083448f81e68de9202258ee9f5ec313874bb0e2537'
    owner: 'ak_BXprz9o24a8RYbvBRDsUCBdGpz2uULBnDw6BiYpG957BiEvVn'
treasury:
  account:
    addr: 'ak_CLTKb9tdvXGwpgUBW8GytW7kXv9r1eJyY4YtgKKWtKcY3poQf'
    index: 0
    mnemonic: 'horror hunt card coconut wait snack clerk prepare process oval radar praise candy sting fury target fan nothing option pattern garden off when deer'
    privKey: '9ab3bb473a0ec30d4f75f877ee9de0145fbd883e07edab2e4555e156a729be5619bd0a236a9ebd4a47e5fc3961b59ea215515109c007e2ce844b1f543d4e9598'
  initialBalance: 1000000000000000000000000000000000000000000000000
validators:
  - account:
      addr: 'ak_o9UXHESE3mDd9qeDKnxkRrfUS3eY17xkhshZX3VFqAbkVMUDV'
      index: 0
      mnemonic: 'seminar else board area mercy dune bottom wide move emotion fold goat recipe horror liquid spoon visa click hen benefit link lawn castle hospital'
      privKey: 'fca30982735665d39d52146c30837cc33cf1c11015accb5ce520065223872e3968c7c7dc1372514ada09eac4a433ee479bf980c6d9d8bbdc88284cb19e8b4cb6'
    initialBalance: 3100000000000000000000000000
  - account:
      addr: 'ak_2uc64DEjX1XCe2dYtTaDBfGXqPDiv1Xcu29T4P2x5NzXnRerAA'
      index: 0
      mnemonic: 'arrest friend excuse expect learn material differ fat fiscal subway ghost quick science balcony thing receive wage hold visa boy still close pull mutual'
      privKey: '43a889d992a923e195cecf0f4346e4f480cec0ef2f561e383cf6b367e4da8b3dfb245ed4f23bcc25205d1cba30c85ed3a9a3a10858e12a6944d81944d3277850'
    initialBalance: 3100000000000000000000000000
  - account:
      addr: 'ak_BXprz9o24a8RYbvBRDsUCBdGpz2uULBnDw6BiYpG957BiEvVn'
      index: 0
      mnemonic: 'orchard issue drip level knife mechanic dirt keep gas potato close path recall rice strong seminar tattoo alien wealth note soft cash include business'
      privKey: '30267f551a56954f654edaa3cb21a58a21898af0519503d3737f8cd5c8b913eb17e9b9a1f3f725b0de559f30276ff065a84cca01b5720df302e2044032acd6ba'
    initialBalance: 3100000000000000000000000000

5. Generate Configuration Files

To generate all the configuration files needed to run a Hyperchain, run:

npm run dev gen-node-conf hc_test

This will create 3 files in nodeConfig directory:

• aeternity.yaml

• hc_test_accounts.json

• hc_test_contracts.json

Don't forget to fund all pinners accounts on the parent chain prior starting your node/validator.

IMPORTANT: If you used a known public chain (testnet or mainnet) as parent chain, the tool will set the start_height as current block + 10, that is 30 minutes in future. Keep that in mind when verifying your chain, either decrease the number or wait until that block is produced on the parent chain before you start transacting on the Hyperchain.

6. Run a Node

Docker

To allow inter-container connections between nodes, i.e. adding more nodes to the setup later, a Docker network should be created first:

docker network create hyperchain

A container name initiator is also used to allow docker network access to the container later.

Use Docker volumes to install the configuration files and run the node at once:

docker run --rm -it -p 3013:3013 \
    --network=hyperchain --name initiator \
    -v ${PWD}/hc_test/nodeConfig/aeternity.yaml:/home/aeternity/.aeternity/aeternity/aeternity.yaml \
    -v ${PWD}/hc_test/nodeConfig/hc_test_accounts.json:/home/aeternity/node/data/aecore/hc_test_accounts.json \
    -v ${PWD}/hc_test/nodeConfig/hc_test_contracts.json:/home/aeternity/node/data/aecore/hc_test_contracts.json \
    aeternity/aeternity:v7.3.0-rc3

Verify your node is running with:

curl -s localhost:3013/v3/status | jq

Expected output:

{
  "difficulty": 0,
  "genesis_key_block_hash": "kh_7dm2zSo6NsnEDMYBYdXA9QvkJvvk7TenT68HxW5BSrRSz3WV6",
  "hashrate": 0,
  "listening": true,
  "network_id": "hc_test",
  "node_revision": "57bc00b760dbb3ccd10be51f447e33cb3a2f56e3",
  "node_version": "7.3.0-rc3",
  "peer_connections": {
    "inbound": 0,
    "outbound": 0
  },
  "peer_count": 0,
  "peer_pubkey": "pp_2ZX5Pae6a9L5UFm8VcCNsB39pn3EK7ZQZpp3dfF1WDNFXZ9p3b",
  "pending_transactions_count": 0,
  "protocols": [
    {
      "effective_at_height": 0,
      "version": 6
    }
  ],
  "solutions": 0,
  "sync_progress": 100,
  "syncing": false,
  "top_block_height": 2,
  "top_key_block_hash": "kh_2QCveiMjWXbuDzXkJmpposgmTrdSmPJnWBFpq33Xc6bZZnBXP4",
  "uptime": "6s.18"
}

For more details refer to dedicated Docker section.

Tarball Installation

Copy all of the above files to their node corresponding directory, i.e. assuming it's in ~/aeternity/node:

cp ./hc_test/nodeConfig/aeternity.yaml ~/aeternity/node/
cp ./hc_test/nodeConfig/hc_test_*.json ~/aeternity/node/data/aecore/

then run your node:

~/aeternity/node/bin/aeternity start

Verify your node is running with:

~/aeternity/node/bin/aeternity status

Expected output:

Genesis block Hash          kh_7dm2zSo6NsnEDMYBYdXA9QvkJvvk7TenT68HxW5BSrRSz3WV6
Difficulty                  0
Syncing                     false
Sync progress               100.0
Node version                7.3.0-rc2
Node revision               336f76030d86f3accce7e8611f36f7e7641e2695
Peer count                  0
Peer connections (inbound)  0
Peer connections (outbound) 0
Pending transactions count  0
Network id                  hc_test
Peer pubkey                 pp_rx9MgTnZdB5Vhmpe9iCsms7bESn2ACfJtNoVXGUWKdPhQXqco
Top key block hash          kh_2DbFXJ5Uub5ogEXv7wVEhoiMMe5LDQTbYoU4x5D1jQp1XuzgE2
Top block height            404
Top block protocol          6 (ceres)

If the output is Node is not running! check node logs for errors to debug it further.

7. Begin Operations

After your Hyperchain node is running and producing blocks, you can begin interacting with the chain. The recommended next steps are:

1. Connect supporting tools to your chain:

   • Block explorer (e.g., Aescan)

   • Wallet interface (e.g., Superhero Wallet or Base app)

2. Import your test accounts:

   • Access the account mnemonics from hc_test/economy-unencrypted.yaml

   • Import these into your preferred wallet (e.g., Superhero Wallet)

   • Configure your wallet's network settings:

     • Node address (e.g., localhost)

     • HTTP API port (default: 3013)

     • Network ID (hc_test in this example)

You can now begin testing transactions and interactions with your Hyperchain deployment.

Happy Hyperchaining :)

Configuring New Validator

NOTICE: This documentation covers beta functionality intended for testing purposes only.

After establishing a Hyperchain, you can add additional validators or join an existing Hyperchain as a validator. This guide demonstrates how to configure a new validator on a Hyperchain using the Aeternity blockchain as the parent chain.

Important Notes:

• The process requires approximately 2 hours before the new validator begins producing blocks

• A minimum stake of 1000000AE is required

• Both a staker account (for the child chain) and a pinner account (for the parent chain) are needed

Install Aeternity CLI

The Aeternity Command Line Interface (CLI) is required to manage wallets and interact with smart contracts. Install it using npm:

npm install --global @aeternity/aepp-cli@7
aecli --version

Account Setup

Two accounts are required for validator operation:

1. Staker Account: Holds funds for staking in the Hyperchain consensus (child chain)

2. Pinner Account: Executes pinning transactions on the parent chain

Create a Staker Account

First we need to create a staker account, that's the account that will hold the funds used to stake in the Hyperchain PoS consensus.

aecli account create hc_test/wallets/staker.json

Expected output:

✔ Enter your password …
Address  ak_2hT1UTevtPkEpocjEcbbBi14gS1Ba1unHQBrtXupHnKHxk26kU
Path     /path/to/hyperchain-starter-kit/configs/hc_test/wallets/staker.json

Once the account is created, the private key should be extracted as it's needed in the node configuration afterwards:

aecli account address --secretKey hc_test/wallets/staker.json

Expected output:

✔ Are you sure you want print your secret key? … yes
✔ Enter your password …
Address            ak_2hT1UTevtPkEpocjEcbbBi14gS1Ba1unHQBrtXupHnKHxk26kU
Secret Key         sk_2KaWrN7mJ5yfj5yikQwepSaPXksgjuYda7QoXtjfVhRfFVDJvs
Secret Key in hex  ade11d353b3b02f9602aa7073683a1c2b2a5d95c73b99d8fc40eafa82b02e957df8a07444f1195795a2f92915e655696a3a6a330015c58673ae9f73a1abff374

Note the public and private keys of the account, it will be used below.

Create a Pinner Account

Important: The pinner account must be funded on the parent chain before starting your validator node. For testnet deployment, use the testnet faucet.

If the validator pinning is enabled, a parent chain account will be needed as well to execute it:

aecli account create hc_test/wallets/pinner.json

Expected output:

✔ Enter your password …
Address  ak_2CQQctWm267tfHMUcZf7YX5uVHE6T9t3bg4UNpWnpn8qog6MZ
Path     /path/to/hyperchain-starter-kit/configs/hc_test/wallets/pinner.json

Once the account is created, the private key should be extracted as it's needed in the node configuration afterwards:

aecli account address --secretKey hc_test/wallets/pinner.json

Expected output:

✔ Are you sure you want print your secret key? … yes
✔ Enter your password …
Address            ak_2CQQctWm267tfHMUcZf7YX5uVHE6T9t3bg4UNpWnpn8qog6MZ
Secret Key         sk_X8YAj8XRzTEsAdQJZDt6n3baCcCs2mHRwiT4rtBYEE8baBLfX
Secret Key in hex  4469eb651fa54025ccecf2bfe462a2051e690f7b2bb23ea0f49e6f77a7b1763c02b7910b1a543221b15f14b196ed1ba3212031d817a9c09ac200387ab5631a25

Note the public and private keys of the account, it will be used below.

Configure the Validator Node

The new validator node needs at least one peer to connect to an existing Hyperchain network. As this example assuming an already running local node, the peer key can be obtained from its status API endpoint:

curl -s localhost:3013/v3/status | jq -r '.peer_pubkey'

Expected output:

pp_2ZX5Pae6a9L5UFm8VcCNsB39pn3EK7ZQZpp3dfF1WDNFXZ9p3b

This example assumes your initiator runs in a docker container from the example above and its address would be initiator (the container name). If the initiator node runs outside docker container, the address will be localhost.

So, the peer URL is: aenode://pp_2ZX5Pae6a9L5UFm8VcCNsB39pn3EK7ZQZpp3dfF1WDNFXZ9p3b@initiator:3015 That will be configured under the peers configuration key below.

The accounts.json and contracts.json will be reused from the previous example, but one can duplicate them as well in new directory as needed.

Copy the node configuration from the previous example:

cp hc_test/nodeConfig/aeternity.yaml hc_test/nodeConfig/validator2.yaml

The validator2.yaml configuration must be changed to remove the initial stakers and pinners and replace it with the new accounts created above and add peers, everything else should stay intact:

peers:
  # Connect to existing Hyperchain network
  - aenode://pp_2ZX5Pae6a9L5UFm8VcCNsB39pn3EK7ZQZpp3dfF1WDNFXZ9p3b@initiator:3015
chain:
  consensus:
    '0':
      config:
        child_block_time: 3000
        child_epoch_length: 600
        contract_owner: 'ak_11111111111111111111111111111115rHyByZ'
        default_pinning_behavior: true
        election_contract: 'ct_LRbi65kmLtE7YMkG6mvG5TxAXTsPJDZjAtsPuaXtRyPA7gnfJ'
        fixed_coinbase: 100000000000000000000
        parent_chain:
          consensus:
            network_id: 'ae_uat'
            type: 'AE2AE'
          parent_epoch_length: 10
          polling:
            fetch_interval: 500
            nodes:
              - 'https://testnet.aeternity.io'
          start_height: 1064939
        pinners:
          - parent_chain_account:
              owner: 'ak_2hT1UTevtPkEpocjEcbbBi14gS1Ba1unHQBrtXupHnKHxk26kU'
              priv: '4469eb651fa54025ccecf2bfe462a2051e690f7b2bb23ea0f49e6f77a7b1763c02b7910b1a543221b15f14b196ed1ba3212031d817a9c09ac200387ab5631a25'
              pub: 'ak_2CQQctWm267tfHMUcZf7YX5uVHE6T9t3bg4UNpWnpn8qog6MZ'
        pinning_reward_value: 1000000000000000000000
        rewards_contract: 'ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK'
        stakers:
          - hyper_chain_account:
              priv: 'ade11d353b3b02f9602aa7073683a1c2b2a5d95c73b99d8fc40eafa82b02e957df8a07444f1195795a2f92915e655696a3a6a330015c58673ae9f73a1abff374'
              pub: 'ak_2hT1UTevtPkEpocjEcbbBi14gS1Ba1unHQBrtXupHnKHxk26kU'
        staking_contract: 'ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK'
      type: 'hyperchain'
  hard_forks:
    '6':
      accounts_file: 'hc_test_accounts.json'
      contracts_file: 'hc_test_contracts.json'
      height: 0
fork_management:
  network_id: 'hc_test'
mining:
  autostart: true
http:
  endpoints:
    dry-run: true
    hyperchain: true

Note that account addresses, account keys and peer keys will be different on different runs, make sure to copy the correct ones!

Start the Node

This example assumes you have a Hyperchain validator node (initiator) already running on localhost in a Docker container within a network named hyperchain. Since the node's API ports are exposed to the host, we need to use alternative ports to prevent conflicts. In this example, we will remap port 3013 to 33013 while keeping the default port in the node configuration.

docker run --rm -it -p 33013:3013 \
    --network hyperchain \
    -v ${PWD}/hc_test/nodeConfig/validator2.yaml:/home/aeternity/.aeternity/aeternity/aeternity.yaml \
    -v ${PWD}/hc_test/nodeConfig/hc_test_accounts.json:/home/aeternity/node/data/aecore/hc_test_accounts.json \
    -v ${PWD}/hc_test/nodeConfig/hc_test_contracts.json:/home/aeternity/node/data/aecore/hc_test_contracts.json \
    aeternity/aeternity:v7.3.0-rc3

Verify the new validator node is running with:

curl -s localhost:33013/v3/status | jq

Expected output:

{
  "difficulty": 0,
  "genesis_key_block_hash": "kh_7dm2zSo6NsnEDMYBYdXA9QvkJvvk7TenT68HxW5BSrRSz3WV6",
  "hashrate": 0,
  "listening": true,
  "network_id": "hc_test",
  "node_revision": "57bc00b760dbb3ccd10be51f447e33cb3a2f56e3",
  "node_version": "7.3.0-rc3",
  "peer_connections": {
    "inbound": 0,
    "outbound": 1
  },
  "peer_count": 1,
  "peer_pubkey": "pp_ENJfMAPXWbZruYgexnGCNEwCBwdLcEiR8F541CuzCkgtFQ5jt",
  "pending_transactions_count": 0,
  "protocols": [
    {
      "effective_at_height": 0,
      "version": 6
    }
  ],
  "solutions": 0,
  "sync_progress": 100,
  "syncing": false,
  "top_block_height": 35,
  "top_key_block_hash": "kh_FK7EvnCYsq9DdbZLtBpFPdD5UdTNYGWnWfQShNgVkbY6iyP3h",
  "uptime": "59s.448"
}

Make sure that:

• genesis_key_block_hash is the same as the status output of the initiator node

• network_id is the same as the status output of the initiator node

• peer_count is more than 0

• top_block_height is more than 0

• sync_progress is 100

The above should confirm the new validator is up, running and connected to the initiator Hyperchain network!

Register New Validator

Once the new node is running it's time to register it as validator with the Hyperchain consensus.

CLI Node Config

First the CLI have to be configured to work with the locally running Hyperchain network created in this example:

aecli select-node http://localhost:3013/

Verify the configuration by running:

aecli config

Expected output:

Node http://localhost:3013/ network id hc_test, version 7.3.0-rc3, protocol 6 (Ceres)
Compiler https://v8.compiler.aepps.com/ version 8.0.0

Funding

The staker account must be funded with at least the minimum staking amount (1000000AE in this example) and some extra for transacting. In this example the treasury account can be used by loading it in a wallet

With the help of the CLI the treasury secret key is imported then used to send tokens to the new staker account:

aecli account create hc_test/wallets/treasury.js 9ab3bb473a0ec30d4f75f877ee9de0145fbd883e07edab2e4555e156a729be5619bd0a236a9ebd4a47e5fc3961b59ea215515109c007e2ce844b1f543d4e9598

Output:

✔ Enter your password …
Address  ak_CLTKb9tdvXGwpgUBW8GytW7kXv9r1eJyY4YtgKKWtKcY3poQf
Path     /path/to/hyperchain-starter-kit/configs/hc_test/wallets/treasury.js

Verify the treasury balance:

aecli inspect ak_CLTKb9tdvXGwpgUBW8GytW7kXv9r1eJyY4YtgKKWtKcY3poQf

Output:

Account ID       ak_CLTKb9tdvXGwpgUBW8GytW7kXv9r1eJyY4YtgKKWtKcY3poQf
Account balance  1000000000000000000000000000000ae
Account nonce    0
No pending transactions

Fund the staker account from the treasury wallet:

aecli spend hc_test/wallets/treasury.js ak_2hT1UTevtPkEpocjEcbbBi14gS1Ba1unHQBrtXupHnKHxk26kU 1000100ae

Output:

Cost of SpendTx execution ≈ 1000100.0000169ae
✔ Enter your password …
Transaction mined
Transaction hash   th_2JLcgQkpD4Rz42L3rmKsLoZ2fomGuoVNpoJjnAMxTcbmoznjbb
Block hash         mh_2uWKDfDj5evXncvJd6V7c76pQdhYuKWDUjxP2jqr5cj7BW9b99
Block height       2052 (about now)
Signatures         ["sg_BYKqfbZej3CPUHz9sJfHRM5o8YLevTjhoU3JAHivU8d8wv9L8TuA2kx74vm5xTHSmFQxo2d4uDBJKWuz9K5QmTDCUNDLc"]
Transaction type   SpendTx (ver. 1)
Sender address     ak_CLTKb9tdvXGwpgUBW8GytW7kXv9r1eJyY4YtgKKWtKcY3poQf
Recipient address  ak_2hT1UTevtPkEpocjEcbbBi14gS1Ba1unHQBrtXupHnKHxk26kU
Amount             1000100ae
Payload            ba_Xfbg4g==
Fee                0.0000169ae
Nonce              1
TTL                2053 (about now)

Validator Registration

The registration happens with a contract call to the staking_contract address, in this example: ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK.

For a reference (not shell command), the Sophia function signature that needs to be called is:

payable stateful entrypoint new_validator(owner : address, sign_key : address, restake : bool) : StakingValidator

The same address (ak_2hT1UTevtPkEpocjEcbbBi14gS1Ba1unHQBrtXupHnKHxk26kU) will be used for owner and sign_key, restake will be set to false.

aecli contract call new_validator '["ak_2hT1UTevtPkEpocjEcbbBi14gS1Ba1unHQBrtXupHnKHxk26kU", "ak_2hT1UTevtPkEpocjEcbbBi14gS1Ba1unHQBrtXupHnKHxk26kU", false]' hc_test/wallets/staker.json --contractAddress ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK --contractAci hc_devnet/contracts/MainStaking.aci.json --amount 1000000ae

Output:

Cost of ContractCallTx execution ≈ 1000000.000236691ae
✔ Enter your password …
Transaction hash  th_4VXdLJjpAXAnGMe7RRfwKtPguXGWJaLVLoKR7EgcVe1w2MGtk
Block hash        mh_2XhasD3FXo4RSyKdrkUMw8NQdDx2bkXKhZJfV1idwXjUeFHPEk
Block height      2512 (about now)
Signatures        ["sg_R5STDGXkZyCejyiyahzJJLGN8GThrZsCH3hY6e7GkLb8eebz8sHbj8ECe21tscXw2Eh2zDvaryyuy9fnCvNX8wewciXER"]
Transaction type  ContractCallTx (ver. 1)
Caller address    ak_2hT1UTevtPkEpocjEcbbBi14gS1Ba1unHQBrtXupHnKHxk26kU
Contract address  ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK
Gas               53031 (0.000053031ae)
Gas price         0.000000001ae
Call data         cb_KxFuGm1JO58AoN+KB0RPEZV5Wi+SkV5lVpajpqMwAVxYZzrp9zoav/N0nwCg34oHRE8RlXlaL5KRXmVWlqOmozABXFhnOun3Ohq/83R/GCn/XQ==
ABI version       3 (Fate)
Amount            1000000ae
Fee               0.00018366ae
Nonce             1
TTL               2514 (in 6 minutes)
----------------------Call info-----------------------
Gas used                42425 (0.000042425ae)
Return value (encoded)  cb_nwKgZYU1vdfnMJUPDrJIhcZ5xLhgivcS2Y7lZhl77npIApLx8dm1
Return value (decoded)  ct_miCfZgeT2fEE9E7XpFikAUReP62QJtZizypJGvw38SYuXJNHN

Now the new validator is registered as part of the consensus! The return value ct_miCfZgeT2fEE9E7XpFikAUReP62QJtZizypJGvw38SYuXJNHN is the validator contact address.

Please note that the new validator will start producing blocks after 4 epochs (2400 blocks), that's after 2 hours in this example!

Configuration Explained

An Aeternity Hyperchain node is built on a standard Aeternity release with specific consensus configuration. After completing the installation and basic configuration, you'll need to add the following Hyperchain-specific configurations to your aeternity.yaml or .json file. Please follow the installation instructions and do basic configuration. Then adopt and add the additional configuration below to your aternity.yaml or (.json).

Parent chain

To configure your parent chain connection, you'll need to specify several key parameters. Start by setting the chain connector to AE2AE and network ID to ae_uat. Next, configure your parent chain node address using the parent node's HTTP API port, not the external port. When setting the fetch interval, ensure it's frequent enough to capture all state changes on the parent chain. Finally, specify a future block height on the parent chain as your starting point. This height determines when your child chain will begin its operations, including block production and pinning. This configuration creates a deliberate delay, allowing for proper initialization and synchronization:

parent_chain:
  consensus:
    network_id: 'ae_uat'
    type: 'AE2AE'
  polling:
    fetch_interval: 500
    nodes:
      - 'http://localhost:6013'
  start_height: 1064531

Block times and epochs

The initial "speed" of the Hyperchain is defined by the epoch and block production parameters. These will be different for each Hyperchain, depending on the desired transactional characteristics of the chain. The values below are useful for testing purposes, and when running on Aeternity testnet. Please see the main Hyperchain documentation for more information in how to optimize block and epoch parameters per application and parent chain characteristics.

First a parent chain epoch length should be picked. That should be long enough to statistically easy any block time fluctuations. In this example with Aeternity testnet as parent chain, 10 blocks should be enough.

parent_chain:
  parent_epoch_length: 10

This version of Hyperchains supports block times as low as 3 seconds for various reasons (i.e. network latency, disk latency, etc.) That can be set as (in milliseconds):

child_block_time: 3000

And lastly, but very important is the child epoch length. It is mandatory to have equal parent and child epoch length in wall clock times:

parent_block_time * parent_epoch_length = child_block_time * child_epoch_length
(parent_block_time * parent_epoch_length)/child_block_time = child_epoch_length

In this example the Aeternity testnet is having 180s block times, so:

(180 * 10)/3 = 600

child_epoch_length: 3000

Stakers

We define three stakers, that need to have accounts and funds to stake on the Hyperchain. Once a staker becomes leader, their private key is used to sign produced blocks by the node.

stakers:
  - hyper_chain_account:
      priv: 'fca30982735665d39d52146c30837cc33cf1c11015accb5ce520065223872e3968c7c7dc1372514ada09eac4a433ee479bf980c6d9d8bbdc88284cb19e8b4cb6'
      pub: 'ak_o9UXHESE3mDd9qeDKnxkRrfUS3eY17xkhshZX3VFqAbkVMUDV'
  - hyper_chain_account:
      priv: '43a889d992a923e195cecf0f4346e4f480cec0ef2f561e383cf6b367e4da8b3dfb245ed4f23bcc25205d1cba30c85ed3a9a3a10858e12a6944d81944d3277850'
      pub: 'ak_2uc64DEjX1XCe2dYtTaDBfGXqPDiv1Xcu29T4P2x5NzXnRerAA'
  - hyper_chain_account:
      priv: '30267f551a56954f654edaa3cb21a58a21898af0519503d3737f8cd5c8b913eb17e9b9a1f3f725b0de559f30276ff065a84cca01b5720df302e2044032acd6ba'
      pub: 'ak_BXprz9o24a8RYbvBRDsUCBdGpz2uULBnDw6BiYpG957BiEvVn'

Accounts

When starting a Hyperchain it needs some pre-funded accounts as most other chains and types. At least the staker's accounts must be funded so that they can be registered with some initial stake to boot the consensus. In this example there are 3 stakers pre-funded with 3100000000000000000000000000 each so they can be registered at genesis time. Also some additional accounts like Faucet (ak_WNkJkmaEoyScVRaeZeDvvmCqLn1HkfNnQDy1oSJp6Jm5YPpAq) and Treasury (ak_CLTKb9tdvXGwpgUBW8GytW7kXv9r1eJyY4YtgKKWtKcY3poQf) are also funded for easing the chain usage.

  {
    "ak_CLTKb9tdvXGwpgUBW8GytW7kXv9r1eJyY4YtgKKWtKcY3poQf": 1000000000000000000000000000000000000000000000000,
    "ak_WNkJkmaEoyScVRaeZeDvvmCqLn1HkfNnQDy1oSJp6Jm5YPpAq": 1000000000000000000000000000,
    "ak_o9UXHESE3mDd9qeDKnxkRrfUS3eY17xkhshZX3VFqAbkVMUDV": 3100000000000000000000000000,
    "ak_2uc64DEjX1XCe2dYtTaDBfGXqPDiv1Xcu29T4P2x5NzXnRerAA": 3100000000000000000000000000,
    "ak_BXprz9o24a8RYbvBRDsUCBdGpz2uULBnDw6BiYpG957BiEvVn": 3100000000000000000000000000
  }

Contracts

Hyperchains operate through FATE contracts which must be compiled and provided to the node. These contracts require initialization during the first (genesis) block of the Hyperchain, which involves specific contract calls. While this configuration can be manually set in contracts.json, the process is technically complex. We recommend using our purpose-built CLI tools to handle contract deployment and initialization.

In this example two contracts are deployed: MainStaking.aes and HCElection.aes then there are three contract calls to register the stakers/validators, 3 in this example.

Please refer to the hyperchain-starter-kit documentation above how to generate the files.

{
  "contracts": [
    {
      "abi_version": 3,
      "vm_version": 8,
      "amount": 0,
      "nonce": 1,
      "call_data": "cb_KxFE1kQfG2+K08IbzsztoP//wBN1Y+0=",
      "code": "cb_+RooRgOgOUIJ6aG22mq1hxGo9uIfqnsWK5hy9d6LWKhQXT42NwfAuRn6uRM9....SNIP",
      "owner_pubkey": "ak_11111111111111111111111111111115rHyByZ",
      "pubkey": "ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK"
    },
    {
      "abi_version": 3,
      "vm_version": 8,
      "amount": 0,
      "nonce": 2,
      "call_data": "cb_KxFE1kQfG58CoCmQRGuzLDSzySG/5UcFOdoQ1iYy6a6fhJXVahjufrESSdmdMQ==",
      "code": "cb_+Q2cRgOgT4Um34MEjJkEOajx7RyKC+E7kWgbLSK4Hgf8VYE1Q4vAuQ1uuQoT/...SNIP",
      "owner_pubkey": "ak_11111111111111111111111111111115rHyByZ",
      "pubkey": "ct_LRbi65kmLtE7YMkG6mvG5TxAXTsPJDZjAtsPuaXtRyPA7gnfJ"
    }
  ],
  "calls": [
    {
      "abi_version": 3,
      "amount": 1000000000000000000000000,
      "call_data": "cb_KxFuGm1JO58AoGjHx9wTclFK2gnqxKQz7keb+YDG2di73IgoTLGei0y2nwCgaMfH3BNyUUraCerEpDPuR5v5gMbZ2LvciChMsZ6LTLZ/AEXInw==",
      "caller": "ak_o9UXHESE3mDd9qeDKnxkRrfUS3eY17xkhshZX3VFqAbkVMUDV",
      "contract_pubkey": "ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK",
      "nonce": 1,
      "fee": 1000000000000000,
      "gas": 1000000,
      "gas_price": 1000000000
    },
    {
      "abi_version": 3,
      "amount": 1000000000000000000000000,
      "call_data": "cb_KxFuGm1JO58AoPskXtTyO8wlIF0cujDIXtOpo6EIWOEqaUTYGUTTJ3hQnwCg+yRe1PI7zCUgXRy6MMhe06mjoQhY4SppRNgZRNMneFB/pplUGQ==",
      "caller": "ak_2uc64DEjX1XCe2dYtTaDBfGXqPDiv1Xcu29T4P2x5NzXnRerAA",
      "contract_pubkey": "ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK",
      "nonce": 1,
      "fee": 1000000000000000,
      "gas": 1000000,
      "gas_price": 1000000000
    },
    {
      "abi_version": 3,
      "amount": 1000000000000000000000000,
      "call_data": "cb_KxFuGm1JO58AoBfpuaHz9yWw3lWfMCdv8GWoTMoBtXIN8wLiBEAyrNa6nwCgF+m5ofP3JbDeVZ8wJ2/wZahMygG1cg3zAuIEQDKs1rp/TbwekQ==",
      "caller": "ak_BXprz9o24a8RYbvBRDsUCBdGpz2uULBnDw6BiYpG957BiEvVn",
      "contract_pubkey": "ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK",
      "nonce": 1,
      "fee": 1000000000000000,
      "gas": 1000000,
      "gas_price": 1000000000
    }
  ]
}

Once the contracts are generated they have to be also added in the node consensus configuration. Current configuration expect 3 separate contracts:

staking_contract: 'ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK'
election_contract: 'ct_LRbi65kmLtE7YMkG6mvG5TxAXTsPJDZjAtsPuaXtRyPA7gnfJ'
rewards_contract: 'ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK'

However, the current implementation is using the staking contract instance for rewards distribution, thus the addresses are the same.

Finally the contract owner should be set the same as the owner of the contract deployment in the contracts.json:

contract_owner: 'ak_11111111111111111111111111111115rHyByZ'

This ensures that the protocol methods can be called only by the protocol and not other accounts. In this example the so called "zero" address is used for that.

Pinning

Currently only a single pinning behavior is supported. Validators will automatically pin the Hyperchain state to the parent chain when they are leaders of the last block of the epoch using their mapped parent account credentials. It can be enabled by:

default_pinning_behavior: true

That feature also needs pinning accounts configuration, it's map of staker to pinning account, for example:

pinners:
  - parent_chain_account:
      owner: 'ak_o9UXHESE3mDd9qeDKnxkRrfUS3eY17xkhshZX3VFqAbkVMUDV'
      priv: '9e2c28f2037e6d352a88137572255ed8af2e86dfb2c2949c4d805ff08bff2784d465bc1253fd1594ecc68e128bb2e241fb2fc0bd48a72e7d57af6dadad67b5dc'
      pub: 'ak_2cYQac22msS2BGxR44BiD3CSLDvG9Xuamn61y2gdb8qJXwd7or'
  - parent_chain_account:
      owner: 'ak_2uc64DEjX1XCe2dYtTaDBfGXqPDiv1Xcu29T4P2x5NzXnRerAA'
      priv: 'c447e8e3159a57ebffb19f3bd7c63afd739e5c592d9bd20620dff61c58d842b062b2dd406ded9a12fb6e455ce2fe3eb1af96182f5a59697e04478e372c58c927'
      pub: 'ak_kU8HHb7raYHf5USrEv1zQ1WfFU8Fccrzp2nPM7gtoAvi3cFZh'
  - parent_chain_account:
      owner: 'ak_BXprz9o24a8RYbvBRDsUCBdGpz2uULBnDw6BiYpG957BiEvVn'
      priv: 'a19771d213eadede7c3332244ddeaa5e2caaa8be4aae79eee8d425e47a237dffafd27c0d8b8485c6dab5ec083448f81e68de9202258ee9f5ec313874bb0e2537'
      pub: 'ak_2LS9FZLu7v5mVHW8sHa8DxvVWzfKf39SHrHNmmvQseTWCbff5J'

To encourage validators to pin epoch states to the parent chain, the system provides rewards in the Hyperchain's native currency. The reward amount for each successful pinning operation can be configured to align with your Hyperchain's economic model. This value represents the compensation validators receive for performing verifiable pinning operations for each epoch.

pinning_reward_value: 1000000000000000000000

Complete configuration example

chain:
  consensus:
    '0':
      config:
        child_block_time: 3000
        child_epoch_length: 600
        contract_owner: 'ak_11111111111111111111111111111115rHyByZ'
        default_pinning_behavior: true
        election_contract: 'ct_LRbi65kmLtE7YMkG6mvG5TxAXTsPJDZjAtsPuaXtRyPA7gnfJ'
        fixed_coinbase: 100000000000000000000
        parent_chain:
          consensus:
            network_id: 'ae_uat'
            type: 'AE2AE'
          parent_epoch_length: 10
          polling:
            fetch_interval: 500
            nodes:
              - 'https://testnet.aeternity.io'
          start_height: 1064939
        pinners:
          - parent_chain_account:
              owner: 'ak_o9UXHESE3mDd9qeDKnxkRrfUS3eY17xkhshZX3VFqAbkVMUDV'
              priv: '9e2c28f2037e6d352a88137572255ed8af2e86dfb2c2949c4d805ff08bff2784d465bc1253fd1594ecc68e128bb2e241fb2fc0bd48a72e7d57af6dadad67b5dc'
              pub: 'ak_2cYQac22msS2BGxR44BiD3CSLDvG9Xuamn61y2gdb8qJXwd7or'
          - parent_chain_account:
              owner: 'ak_2uc64DEjX1XCe2dYtTaDBfGXqPDiv1Xcu29T4P2x5NzXnRerAA'
              priv: 'c447e8e3159a57ebffb19f3bd7c63afd739e5c592d9bd20620dff61c58d842b062b2dd406ded9a12fb6e455ce2fe3eb1af96182f5a59697e04478e372c58c927'
              pub: 'ak_kU8HHb7raYHf5USrEv1zQ1WfFU8Fccrzp2nPM7gtoAvi3cFZh'
          - parent_chain_account:
              owner: 'ak_BXprz9o24a8RYbvBRDsUCBdGpz2uULBnDw6BiYpG957BiEvVn'
              priv: 'a19771d213eadede7c3332244ddeaa5e2caaa8be4aae79eee8d425e47a237dffafd27c0d8b8485c6dab5ec083448f81e68de9202258ee9f5ec313874bb0e2537'
              pub: 'ak_2LS9FZLu7v5mVHW8sHa8DxvVWzfKf39SHrHNmmvQseTWCbff5J'
        pinning_reward_value: 1000000000000000000000
        rewards_contract: 'ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK'
        stakers:
          - hyper_chain_account:
              priv: 'fca30982735665d39d52146c30837cc33cf1c11015accb5ce520065223872e3968c7c7dc1372514ada09eac4a433ee479bf980c6d9d8bbdc88284cb19e8b4cb6'
              pub: 'ak_o9UXHESE3mDd9qeDKnxkRrfUS3eY17xkhshZX3VFqAbkVMUDV'
          - hyper_chain_account:
              priv: '43a889d992a923e195cecf0f4346e4f480cec0ef2f561e383cf6b367e4da8b3dfb245ed4f23bcc25205d1cba30c85ed3a9a3a10858e12a6944d81944d3277850'
              pub: 'ak_2uc64DEjX1XCe2dYtTaDBfGXqPDiv1Xcu29T4P2x5NzXnRerAA'
          - hyper_chain_account:
              priv: '30267f551a56954f654edaa3cb21a58a21898af0519503d3737f8cd5c8b913eb17e9b9a1f3f725b0de559f30276ff065a84cca01b5720df302e2044032acd6ba'
              pub: 'ak_BXprz9o24a8RYbvBRDsUCBdGpz2uULBnDw6BiYpG957BiEvVn'
        staking_contract: 'ct_KJgjAXMtRF68AbT5A2aC9fTk8PA4WFv26cFSY27fXs6FtYQHK'
      type: 'hyperchain'
  hard_forks:
    '6':
      accounts_file: 'hc_test_accounts.json'
      contracts_file: 'hc_test_contracts.json'
      height: 0
fork_management:
  network_id: 'hc_test'
mining:
  autostart: true

---

---

Addendum 1: Hyperchain-specific confguration reference

chain.consensus: object

The consensus algorithms used for validating blocks. Ignored if 'fork_management > network_id' has value 'ae_mainnet' or 'ae_uat'.

Properties (Pattern)

Name	Type	Description	Required
<height>	object	Property name indicates minimum height at which the given
consensus algorithm gets activated. By default from genesis Cuckoo cycle based BitcoinNG is used.	yes

chain.consensus.<height>: object

Configuration parameters for the selected consensus algorithm (Hyperchain).

Properties

Name	Type	Description	Required
type	string	The type of the consensus algorithm used at the given height (ex. pow_cuckoo, smart_contract
or hyperchain) Default: "hyperchain"	yes
config	object	Configuration for the given consensus algorithm	no

Example

chain:
  consensus:
    '0':
      type: hyperchain
      config: ...

chain.consensus.<height>.config: object

Configuration for the given consensus algorithm

Properties

Name	Type	Description	Required
contract_owner	string	Owner of the smart contracts that controls the consensus.
election_contract	string	The address of the smart contract that will be used for leader elections. For a new chain this contract should be loaded at genesis
rewards_contract	string	The address of the smart contract that will be used for reward distributions. For a new chain this contract should be loaded at genesis
genesis_start_time	integer	Timestamp for genesis Default: 0
child_block_time	integer	The average time in milliseconds between two key blocks on the hyperchain Default: 3000
child_block_production_time	integer	The time in milliseconds to produce a hyperchain block
child_epoch_length	integer	The number of blocks in an epoch on the hyperchain
pinning_reward_value	integer	The initial value of the Pinning reward. It can later be changed through consensus Default: 0
default_pinning_behavior	boolean	Use the default pinning behavior, where in each epoch, if the last leader has defined pinning/parent chain credentials, they will pin Default: false
fixed_coinbase	integer	The coinbase reward specifies the fixed amount of newly minted tokens allocated to block producers as an incentive for validating and adding blocks to the chain. Default: 0
parent_chain	object	Details of how this node will connect to a parent chain if this is a hyperchain.
stakers	object[]	List of hyperchain accounts
pinners	object[]	List of parent chain accounts

Example

config:
  genesis_start_time: 0
  child_block_time: 3000
  pinning_reward_value: 0
  default_pinning_behavior: false
  fixed_coinbase: 0
  parent_chain:
    start_height: 0
    acceptable_sync_offset: 60000
    consensus:
      network_id: ae_mainnet
      type: AE2AE
    polling:
      fetch_interval: 500
      retry_interval: 1000
      cache_size: 200
      nodes: []
  stakers:
    - []
  pinners:
    - []

chain.consensus.<height>.config.parent_chain: object

Details of how this node will connect to a parent chain if this is a hyperchain.

Properties

Name	Type	Description	Required
start_height	integer	Height on the parent chain that this hyperchain will start posting commitments and start creating blocks Default: 0
finality	integer	The number of blocks on the parent chain to reach finality.
parent_epoch_length	integer	The number of blocks in an epoch on the parent chain.
acceptable_sync_offset	integer	The maximum amount of time the parent chain block generation can be off the expected time. Default: 60000
consensus	object	Details of the parent chain.
polling	object	Parent chain connection configuration

Additional Properties: not allowed Example

{
    "start_height": 0,
    "acceptable_sync_offset": 60000,
    "consensus": {
        "network_id": "ae_mainnet",
        "type": "AE2AE"
    },
    "polling": {
        "fetch_interval": 500,
        "retry_interval": 1000,
        "cache_size": 200,
        "nodes": []
    }
}

chain.consensus.<height>.config.parent_chain.consensus: object

Details of the parent chain.

Properties

Name	Type	Description	Required
network_id	string	The network Id of the parent chain if it has one Default: "ae_mainnet"
type	string	The type of parent network connection. Currently only AE, Bitcoin and Dogecoin are implemented Default: "AE2AE" Enum: "AE2AE", "AE2BTC", "AE2DOGE"

Additional Properties: not allowed Example

network_id: ae_mainnet
type: AE2AE

chain.consensus.<height>.config.parent_chain.polling: object

Parent chain connection configuration

Properties

Name	Type	Description	Required
fetch_interval	integer	The interval between polls of the parent chain looking for a new block (milliseconds) Default: 500
retry_interval	integer	The amount of time in milliseconds to wait before retrying a check for a block on the parent chain. Default: 1000
cache_size	integer	Size of local cache for parent chain Default: 200
nodes	string[]	List of parent chain nodes to poll for new blocks Default:

Additional Properties: not allowed Example

fetch_interval: 500
retry_interval: 1000
cache_size: 200
nodes: []

chain.consensus.<height>.config.parent_chain.polling.nodes[]: array

List of parent chain nodes to poll for new blocks

Items

URL address of the API - ://:@:

Item Type: string

chain.consensus.<height>.config.stakers[]: array

List of hyperchain accounts

Items

Hyperchain account pair

Item Properties

Name	Type	Description	Required
hyper_chain_account	object	Hyperchain staking account

Item Additional Properties: not allowed Example

- []

chain.consensus.<height>.config.stakers[].hyper_chain_account: object

Hyper chain validator/staking account(s)

Properties

Name	Type	Description	Required
pub	string	Public key Default: ""
priv	string	Private key Default: ""

Additional Properties: not allowed Example

pub: ""
priv: ""

chain.consensus.<height>.config.pinners[]: array

List of parent chain accounts. Relevant only to Aeternity parent chains. For BTC and Doge, each node relies on a local wallet setup with accounts and funds.

Items

Hyperchain parent accounts.

Item Properties

Name	Type	Description	Required
parent_chain_account	object	Parent chain pinning account

Item Additional Properties: not allowed Example

- []

chain.consensus.<height>.config.pinners[].parent_chain_account: object

Parent chain account for executing pinning (spend) transactions

Properties

Name	Type	Description	Required
pub	string	Public key Default: ""
priv	string	Private key Default: ""
owner	string	Public key of Hyperchain account owner. Needs to correspond to an account defined in stakers Default: ""

Additional Properties: not allowed Example

pub: ""
priv: ""
owner: ""